Epoxy Flooring in Oro Grande, CA

Oro Grande has made things for a long time. Limestone quarries opened here in 1887, and cement production started in 1907, according to Wikipedia. Fewer than 1,000 people live in the unincorporated town today, on the line between Victorville and Adelanto. Epoxy flooring in Oro Grande tends to go on floors that do real work: shops, equipment bays, small commercial buildings and garages that double as workspaces.

Older slabs need honest prep

Oro Grande was settled early for the Mojave River. Aaron G. Lane set up a ranch and store at the river crossing in 1859, and the town took its name from the Oro Grande Mine after 1880 strikes at Red Mountain. A town with that much history has buildings and slabs of many ages. Older concrete can be uneven, patched, oil-soaked or painted several times over.

Before we quote, we check for:

• Old paint or coatings that are loose or flaking
• Oil and fluid stains soaked deep into the surface
• Spalled or crumbling areas, especially at doorways
• Cracks that have shifted height across the joint

All coatings and loose material are ground off. Deep stains are degreased. Cracks are filled and ground flush. If a section is too far gone for a coating to help, we tell you before you spend money on it.

Shop and commercial systems

For shops, equipment storage and service bays, we use a thicker 100% solids epoxy. It stands up to rolling jacks, carts, dropped tools and fluid spills better than a thin garage coating. We can add a broadcast aggregate for grip in wet areas and mark walkways or work zones with a contrasting color. For small businesses along the old highway, a sealed floor is easier to sweep and keeps dust down for customers.

Route 66 frontage

Oro Grande sits on old Route 66 near Interstate 15, and travelers still drive the old road between Victorville and Barstow. A few businesses and buildings face that traffic. For a storefront, garage bay or display room, a clean coated floor makes a better first impression than stained concrete, and it is quicker to mop at the end of the day.

Get a Free Estimate

Heat swings on the valley floor

Wikipedia's climate table for Oro Grande shows July highs averaging 98 degrees and January lows averaging 30, with about 5.6 inches of rain a year and essentially none in June. A slab that swings through that range every year moves. Thin, poorly bonded coatings crack and lift first. A properly ground slab and a full-thickness system handle it far better. In summer we work early in the day. In winter we wait for the slab to warm.

Keeping a shop floor in shape

A coated shop floor lasts longer with simple habits. Sweep grit out often, since sand ground under carts wears a topcoat faster than anything else. Wipe up fuel, solvent and brake fluid when they spill instead of letting them sit. Use pads under jack stands and heavy steel feet. If a forklift or loaded cart runs the same path every day, ask us about a thicker build or an extra topcoat in that lane. A worn lane can be recoated later without redoing the whole floor, as long as the base is still bonded.

What we install in Oro Grande

• Commercial & Warehouse Floor Epoxy for shops, bays and business floors
• Garage Floor Epoxy over properly prepared older slabs
• Epoxy Flake Floors where dust and grit come in every day
• Polyaspartic Floor Coating when a floor needs to return to service quickly

Oro Grande sits between Victorville and Helendale, so it is a short trip from our home base.